Skip to product information
1 of 6

findmall

findmall 100 Sqft Electric Radiant Bathroom Kitchen Floor Heating System 120v

findmall 100 Sqft Electric Radiant Bathroom Kitchen Floor Heating System 120v

Regular price $599.99 USD
Regular price $0.00 USD Sale price $599.99 USD
Sale Sold out
Shipping calculated at checkout.

In stock

Specification:

Color:Red

Indoor/Outdoor Usage: Indoor

Mounting Type: Floor Mount

Heating Coverage: 100 square feet

Burner type: Radiant

Voltage: 120 Volts

Size: 100 sq ft

Wattage: 1200 watts

Amperage Capacity: 10 Amps

Maximum Power: 1200 Watts

Usage: Indoor Floor Heating

 

Product Function Description:

LUXURY AND COMFORT:  Enjoy the Warmth of easy-to-install Electric Floor Heating System. Heating Kit Includes: 100 Sqft (120 volt) Self-Adhesive Heating Mat, Cable monitor/Alarm, UDG-4999 Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection). For installation under Tile, Laminates and more.
EASY TO INSTALL: The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing warmth where needed. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. DO NOT CUT or shorten red heater wire. Heating wires MUST be embedded in a self-levelling underlayment, thinset or mortar.

UDG-4999 PROGRAMMABLE THERMOSTAT: Offers a sleek, modern design with intuitive control, making it easy to install and easy to use. The 120 Volt, 15 amp thermostat includes an integrated Class A GFCI (ground fault protection). Features include: Dual sensing (Air/Floor), Power logging, Child lock, & more. The 7-Day Program Schedule provides maximum comfort, while reducing operating costs.
TECHNICAL INFO: Mat Size: 100 Sqft (20"wide × 61.0ft long). Voltage: 120, Amps: 10.0, Watts: 1200 @ 12w/sqft. The Dual wire technology with aluminium shield, reduces electromagnetic fields (EMF) to ultra-low levels. Heating wires are 1/8" in diameter, ensuring minimal effect on finished floor level.


Heating Mat:

The re-enforcing mesh can be cut, turned, flipped, or in part removed, to accommodate any room size or shape. While the MESH can be cut, the heater wire MUST NOT be cut or shortened.
Elements are ETFE insulated and covered by a tough outer jacket, providing the ultimate dialectic and mechanical strength.
Heater wire is less than 5/32" thick, ensuring minimal effect to finished floor height.
Heater wires are pre-spaced at 3” intervals – providing optimal heat distribution.
Mats are 20” wide, and available in various lengths.
Watt density: 12w/sqft.
Voltage: 120v.


UDG-4999 Programmable Thermostat:
The UDG Thermostat can be configured for control of Floor Temperature, Room Temperature, or Room Temperature with Floor Temperature Limiting - providing optimal comfort levels while ensuring floor coverings do not exceed recommended temperatures.
The UDG offers all the necessary functions to ensure easy installation and temperature control, for every floor type. Accurate and intelligent control reduces running costs and ensures personal comfort.
Ambient Temp Range +32 to +104°F (0 to +40°C).
Floor limit range: +41 to +104°F (+5 to +40°C).
Dimensions: H 4.8'' × W 3'' × D 1''.
Load: 15Amps (1800w@120v).
Built-in Class A GFCI.
Voltage: 120v.


Monitor:
Monitor is designed to measure the heating cable’s continuity during installation.
If the heating cable is cut or damaged during installation the Monitor will immediately alert the installer by means of a loud alarm and red flashing light. We still recommend an ohms test is carried out before, during and after installation.
Early warning system, avoiding costly repairs in the future.
Connects directly to the heater - Live, Neutral and Earth.
Provides peace-of-mind during installation.
Offers real-time continuity monitoring.
Includes loud alarm and flashing light.
Works with all floor heating systems.
Includes 2×AAA batteries.


Floor Sensor:
The Floor Sensor is a reliable and accurate temperature sensing probe designed to measure floor temperatures when connected to a thermostat. Thermostats’ default setting is Dual Sensing (Air/Floor), meaning the floor sensor will need to be installed and connected.
The thermostat can be set to measure AIR only, but for optimal control and comfort we recommend installing the floor sensor and using the thermostats default ‘Dual Sensor’ setting.
Installs directly between heating wires for accurate temperature readings
Used in conjunction with Thermostat to limit floor temperature
Resistance: 8 to 12 K OHM measures 68˚F to 86˚F (20˚C to 30˚C)
Neutral polarity making for simple connections
15ft length allows for optimal placement
Connects directly to thermostat
Sensor type: NTC 10 K OHM


Mesh Cutting Techniques – Cut & Rotate:

Heating wires must never touch or cross
Heating wire cannot be cut or shortened
Heating wires must never be closer than 2 ½ inches apart

The mesh between the wires may be cut but take great care not to cut or nick the wire itself.

Wire may also be removed from the mesh and laid out on the floor. Secure in position with pieces of 1'' wide duct tape, or hotmelt glue.


This product offers the best after-sales service.
We are committed to providing you with durable and high quality products.
Thank you for choosing our products! 


Includes:

1 × Floor Heating Mat

1 × UDG-4999 Programmable Thermostat

1 × Monitor

1 × Floor Sensor

View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)