Description
Application & Compatibility
- For a trailer requiring the specified axle rating, wheel-end configuration and mounting dimensions.
- Compatibility is determined by dimensions and component ratings; it is not universal fitment.
Specifications
-
Type: Trailer Axle Beam
-
Axle Capacity: 3,500 lb per axle
-
Hub-Face Length: 95 in
-
Spring-Center Spacing: 80 in
-
Configuration: Bare axle beam without hubs or brake assemblies
-
Axle Material: Steel
-
Finish: Powder coated
-
Brake-Flange Mounting Pattern: 4-bolt
-
Brake-Flange Spacing Reference: 88.7 in
-
Axle Tube Outside Diameter: 60 mm
-
Tube Wall Thickness: 5 mm
-
Inner Bearing Reference: L68149/L68110
-
Outer Bearing Reference: L44649/L44610
-
Seal-Size Reference: 1.72 in
Package Included
- 1 x Trailer Axle Beam
- 2 x Grease Fittings
- 2 x Spacers
- 2 x Spindle Nuts
- 2 x Cotter Pins
Features
- Bare axle beam for a trailer using the matching rating and dimensions.
- Spring-center spacing and compatible wheel-end components must match the trailer setup.
Installation & Important Notes
- Hubs, bearings and brake assemblies are not included. Bearing references identify the spindle fitment only.
- Axle capacity is not trailer payload or GVWR. The installed system is limited by its lowest-rated component.
- Professional installation is recommended.
- Match the dimensions and mounting configuration to the trailer before installation.
Before ordering, verify axle capacity, hub-face length, spring-seat spacing, wheel bolt pattern and bearing/seal dimensions.