Automotive Tools

ApplicationFor temporary lifting during wheel service on compatible vehicles with matching lifting points, sufficient clearance and a load within the jack's marked capacity.Item Specifics Type: Manual scissor jack kit Listed nominal capacity: 3 tons; follow the jack's marked load rating Listed height range: 4.33-17.71 inches Operation: Manual, using the supplied ratchet wrench Jack pad quantity: 2 Features The screw-operated scissor mechanism raises and lowers the jack saddle manually. The kit includes a ratchet wrench, a lug wrench and two jack pads for compatible applications. Package Included 1 x Scissor jack 1 x Ratchet wrench 1 x Lug wrench 2 x Car jack pads Important Notes Confirm saddle shape, pad dimensions and lug wrench size before ordering. The kit is not universally compatible with every car, SUV or MPV. Use only on a firm, level surface at approved vehicle lifting points. Do not exceed the marked capacity. Never work beneath a vehicle supported only by the jack; use rated support stands when required for the service task.

Read more less

ApplicationFor workshop lifting tasks where the jack's marked capacity, contact geometry and minimum clearance match the load.Item Specifics Type: Air hydraulic bottle jack with manual lifting capability Listed nominal capacity: 20 tons; follow the product's marked load rating Material: Steel Color: Blue Minimum height: 260 mm (approximately 10.2 inches) Hydraulic lifting stroke: 170 mm Adjustable extension: 80 mm Maximum total height: 510 mm (approximately 20.1 inches) Features Provides air-powered hydraulic lifting with a manual lifting option. The hydraulic stroke and adjustable extension combine to reach the listed maximum height. Package Included1 x Air hydraulic bottle jackImportant Notes Check the required compressed-air pressure, fittings and supplied operating accessories before ordering. Use only on a firm, level surface at an approved lifting point. Do not exceed the marked load or extension limits. Support the raised load with rated stands; never work beneath a load supported only by the jack.

Read more less

ApplicationFor lifting a compatible vehicle or load at an approved contact point where the jack's clearance and marked capacity are suitable.Item Specifics Type: Manual hydraulic bottle jack Listed nominal capacity: 6 tons; follow the jack's marked load rating Minimum height: 7-1/2 inches Height with hydraulic ram extended: 12-3/4 inches, excluding screw extension Adjustable screw extension: Up to 2-1/2 inches Maximum total height: 15-1/4 inches with screw extension Color: Red Features Manual hydraulic operation raises the ram using the supplied handle. The adjustable screw provides additional contact-height adjustment within the specified range. Package Included 1 x Hydraulic bottle jack 1 x Operating handle Important Notes Confirm the actual marked load rating and minimum vehicle clearance before use. Use on a firm, level surface at an approved lifting point. Never exceed the jack's rated capacity or extension limits. Support a raised load with suitably rated stands; never work beneath a load held only by the jack.

Read more less

ApplicationFor lifting compatible vehicles at approved lifting points where the jack's rated capacity, clearance and air-supply requirements are met.Item Specifics Type: Triple-bag pneumatic air jack Listed nominal capacity: 3 tons; follow the capacity marked on the jack Listed lifting height range: 150-400 mm (approximately 5.9-15.7 inches) Handle: Long handle Color: Red Features The three-bag assembly lifts by inflation from a suitable compressed-air source. The long handle helps maneuver the jack into position and access its controls. Package Included1 x Red triple-bag air jack with long handleImportant Notes Check the red model's own pressure rating and operating instructions before use. Confirm the actual loaded lifting range and vehicle clearance. Use only on a firm, level surface at approved lifting points. After lifting, support the load with rated stands. Never work beneath a vehicle supported only by the jack.

Read more less

ApplicationFor lifting compatible vehicles at approved lifting points when jack clearance, load and air-supply requirements are satisfied.Item Specifics Type: Triple-bag pneumatic air jack Listed nominal capacity: 3 tons; follow the capacity marked on the jack Listed unloaded height range: 150-400 mm (approximately 5.9-15.7 inches) Handle: Long handle Color: Blue Listed net weight: 36 lb (approximately 16.34 kg) Features The three-bag assembly raises the contact pad using compressed air. The long handle helps position the jack and provides access to its controls. Package Included1 x Blue triple-bag air jack with long handleImportant Notes A suitable external compressed-air supply is required. Follow the pressure rating on the product label and manual. The stated height range is unloaded; verify usable clearance and loaded lifting height for your vehicle. Use on a firm, level surface with approved lifting points. After lifting, support the load with rated stands; never work beneath a vehicle supported only by the jack.

Read more less

ApplicationFor compatible axle, hub and other fasteners requiring one of the included metric sizes and sufficient socket clearance.Item Specifics Type: Deep impact socket set Quantity: 4 sockets Drive size: 1/2 inch Socket profile: 12-point Metric sizes: 30, 32, 34 and 36 mm Material: Chrome-molybdenum steel (Cr-Mo) Storage: Carrying case Features Deep sockets provide reach for fasteners located on protruding studs or shafts where clearance permits. Four metric sizes cover the listed fasteners without relying on approximate SAE substitutions. Package Included 1 x 30 mm deep socket 1 x 32 mm deep socket 1 x 34 mm deep socket 1 x 36 mm deep socket 1 x Carrying case Important Notes The set contains four discrete sizes, not every size between 30 and 36 mm. Match the fastener size and profile before use. Follow the vehicle's torque specification and the socket manufacturer's impact-use limits.

Read more less

ApplicationFor servicing compatible passenger-car and SUV coil spring assemblies where both compressors can engage securely and be operated as a matched pair.Item Specifics Type: External coil spring compressor set Quantity: 2 compressors Listed tool length: 280 mm Listed center screw diameter: 18 mm Listed minimum spring inside diameter: 50 mm Listed spring length range: 180-400 mm Operating hex: 19 mm Jaw construction: Heat-treated steel Features Opposed hook jaws engage the spring coils while the threaded screws apply compression. Two compressors are used together to distribute compression across suitable engagement points. Package Included2 x Coil spring compressorsImportant Notes Not intended for heavy trucks or buses. Confirm spring geometry, engagement clearance and permitted spring load before use. Use both compressors in parallel, alternate adjustments evenly and follow the supplied instructions. Do not use an impact wrench unless expressly permitted by the tool manufacturer. Compressed springs store substantial energy. Use only by a person trained in suspension spring service.

Read more less

ApplicationReplacement for selected lift pad applications using a pad that matches reference 5715017 in mounting shape and dimensions.Item Specifics Type: Round lift arm contact pad set Quantity: 4 pads Color: Black Listed outside diameter: Approximately 5 inches; compare the actual pad and holder dimensions Part comparison reference: 5715017 Features The round contact surface sits between a matching lift pad holder and the vehicle's approved lifting point. The set supplies four replacement pads for compatible pad holders. Package Included4 x Round lift arm padsImportant Notes Confirm outside diameter, underside recess, retention shape, thickness and material before fitting. Use only with the lift models and pad holders approved for the replacement dimensions. Not a universal pad for every scissor, two-post or four-post lift. Pad holders and lift assemblies are not listed as included. Replace worn or damaged pads before operating the lift.

Read more less

Application Replacement for selected Coats tire changers using a matching nylon mount/demount head and mounting connection. Listed models: 5030, 5040, 5050, 5060, 5065; 6050, 6060, 6065; 7050, 7055, 7060, 7065, 7655, 7660 and 7665. Confirm head geometry and mounting hardware for the specific machine. Item Specifics Type: Tire changer mount/demount head set Material: Nylon Color: Black Head quantity: 5 Head part reference: 8182960 / 182960 Related kit reference: 8183061 / 183061; compare supplied hardware separately Features Replacement head surfaces guide the tire bead during mounting and demounting. Five heads provide replacements for compatible tire-changing equipment. Package Included 5 x Nylon mount/demount heads 2 x Screw posts 2 x Washers Important Notes These are replacement heads, not complete tire changers. Check the original head profile, mounting bore or stud, fastener dimensions and clearance before ordering. Part references identify compatibility only. Hardware quantities are those listed for this set and may differ from original-manufacturer kits.

Read more less

ApplicationFor servicing motorcycle rear axle nuts with a matching 36 mm hex and suitable access, including belt tension and rear wheel alignment work.Item Specifics Type: Rear axle wrench / torque wrench adapter Hex size: 36 mm Square drive: 1/2 inch Material: Steel Color: Black Tool comparison references: HD-47925; 4882 (OTC reference) Features The 36 mm head engages a matching rear axle nut. The 1/2-inch square drive allows connection to a suitable ratchet or separate torque wrench. Package Included1 x 36 mm rear axle wrenchImportant Notes This tool does not measure or indicate torque by itself. A separate torque wrench is required for controlled tightening. Follow the torque wrench manufacturer's adapter correction guidance and the motorcycle's axle torque specification. Check axle nut size and exhaust clearance; access without exhaust removal depends on the motorcycle configuration.

Read more less

Application Replacement for injector sleeve service on selected 1994-2003 Ford F-250/F-350 vehicles equipped with the 7.3L Power Stroke diesel engine. Also listed for selected 7.3L Power Stroke E-Series applications and 2000-2003 Excursion models; confirm the engine and tool clearance before ordering. Item Specifics Type: Injector sleeve cup removal and installation tool kit Engine application: 7.3L Power Stroke diesel with matching injector sleeve design Related sleeve part references: F4TZ-9F538-A / F4TZ9F538A; 1814376C1 Features Separate removal and installation tools support injector sleeve replacement work. The tool set is intended for sleeve service rather than replacement of the fuel injector itself. Package Included 1 x Injector sleeve remover 1 x Injector sleeve installer Important Notes Not applicable to F-150 models or to other engine families solely because the vehicle name is similar. The listed sleeve numbers identify the serviced components, not the tool's manufacturer part number. Sleeves, injectors and seal kits are not listed as included. Verify engine identification, access clearance and the sleeve service procedure before use. Professional diesel engine service is recommended.

Read more less

ApplicationFor driving, aligning or loosening suitable pins and components during workshop repair.Item Specifics Type: Brass drift punch set Quantity: 3 punches Material: Brass Grip: Knurled body Set comparison reference: 61360 Features Three punch diameters provide options for different pin and component sizes. Knurled bodies provide a textured gripping surface. Package Included 1 x 3/4-inch-diameter x 8-inch-long punch (comparison reference 25075) 1 x 1/2-inch-diameter x 7-inch-long punch (comparison reference 25076) 1 x 3/8-inch-diameter x 6-inch-long punch (comparison reference 25077) Important Notes Select a punch size and striking method appropriate to the workpiece. Wear eye protection. Listed dimensions are in inches; rounded metric equivalents are not separate punch sizes. Comparison numbers identify size references and do not indicate original-manufacturer supply.

Read more less

ApplicationFor measuring installed valve spring height on cylinder head assemblies that provide sufficient clearance for the micrometer.Item Specifics Type: Valve spring installed height micrometer Listed measuring range: 1.600-2.200 inches Material: Aluminum Color: Black Tool comparison reference: 4929 Features Measures the available installed height between the valve spring seat and the retainer contact surface. The adjustable body allows the installed-height reading to be checked during valve spring setup. Package Included1 x Valve spring height micrometerImportant Notes Check measuring range, body clearance, retainer shape and valve assembly geometry before ordering. Use according to the supplied measuring procedure and verify calibration before precision engine work. 4929 is a tool comparison reference and does not indicate original-manufacturer supply.

Read more less

ApplicationReplacement for selected GM transmission service applications: 200-4R, TH350, TH400, 700R4, 4L60E and 4L65E, where the case mounting points match the fixture.Item Specifics Type: Transmission holding fixture Material: Steel Color: Black Mounting: Requires a compatible support stand and matching mounting hardware Features Supports a compatible transmission case during workshop service. The fixture provides an attachment interface for a suitable service stand. Package Included1 x Transmission holding fixtureImportant Notes Support stand is not included in the listed package. Confirm stand interface, case mounting points and required hardware before ordering. Use only within the verified capacity of the fixture and stand. This is not a complete transmission jack.

Read more less

Application Replacement for selected removable hardtops used on Mercedes-Benz SL roadsters, subject to matching support dimensions. Listed model families include W113 (230SL, 250SL, 280SL), R107 (380SL, 450SL, 560SL) and R129 (300SL, 500SL, 600SL, SL320, SL500, SL600). Item Specifics Type: Removable hardtop storage cart Material: Steel Color: Black Casters: 4 total: 2 locking and 2 non-locking Cover: Soft cover included Comparison reference: TC107 / TC107BLACK Features The wheeled frame supports a matching detached hardtop for workshop or garage storage. Two locking casters help hold the cart in position when parked on a level floor. Package Included 2 x Side brackets 2 x 36-inch bars 3 x 29-inch bars 3 x Bolts 1 x Nut 4 x Flat washers 3 x Lock washers 4 x 10 mm spacers 2 x Non-locking casters with locking nuts 2 x Locking casters with locking nuts 1 x 13 mm wrench 1 x Soft cover Important Notes For detached removable hardtops only. Not applicable to fixed-roof 380SLC or 450SLC coupes, or to an integrated folding roof. Confirm hardtop support width and contact points before ordering. Assembly requires 13 mm and 17 mm wrenches. Hardtop is not included. Assemble and secure the cart according to the supplied instructions before loading.

Read more less

ApplicationFor removing a harmonic balancer where the balancer engagement design and available clearance match this puller.Item Specifics Type: Harmonic balancer removal tool Tool comparison reference: 25264 Material: Steel Color: Black Features The puller applies extraction force to a compatible harmonic balancer. A dedicated balancer tool helps keep the pulling force aligned with the crankshaft when properly installed. Package Included1 x Harmonic balancer puller toolImportant Notes Confirm the exact engine, balancer design and puller engagement before ordering; engine displacement alone does not establish fit. The listed package identifies a puller only. A separate balancer installation tool may be required. 25264 is a comparison reference and does not identify original-manufacturer supply.

Read more less

ApplicationFor pressure testing compatible vehicle cooling systems and assisting coolant refill with the supplied vacuum refill components.Item Specifics Type: Cooling system pressure testing and vacuum refill kit Listed test cap quantity: 21 Functions: Pressure testing and vacuum-assisted coolant refill Storage: Carrying case Features The hand pressure pump and matching adapters allow cooling system pressure checks. The vacuum refill components help refill the system using a suitable coolant service procedure. Package Included 1 x Pressure testing pump with hose 21 x Cooling system test caps 1 x Vacuum cooling system purge and refill tool kit 1 x Relief valve 1 x Quick-disconnect fitting 1 x Vacuum gauge 1 x Universal-style adapter 1 x Temperature gauge 1 x Carrying case 1 x Instruction sheet Important Notes Work only on a fully cooled, depressurized cooling system. Never remove a hot pressurized radiator cap. Use the adapter that matches the filler neck or reservoir. Do not exceed the vehicle manufacturer's specified test pressure. Release pressure or vacuum before disconnecting components, and verify the final coolant level and mixture.

Read more less

ApplicationFor inflating compatible vehicle tires and inflatables within the compressor's rated pressure and duty cycle.Item Specifics Type: Portable dual-cylinder air compressor Power supply: 12V DC Power connection: Battery terminal clamps Power cord length: 6.5 ft Air hose length: 26 ft Pressure display: Hose-mounted pressure gauge Features The dual-cylinder compressor connects to a suitable 12V vehicle battery. The long air hose provides reach around the vehicle, and three nozzle adapters support compatible inflation fittings. Package Included 1 x Dual-cylinder air compressor 1 x 6.5 ft power cord with battery clamps 1 x 26 ft air hose with pressure gauge 3 x Nozzle adapters 1 x Nylon storage bag Important Notes Check polarity, current requirements, maximum pressure and permitted run time in the supplied manual. The compressor and hose can become hot during operation. Allow them to cool before handling or storage. Confirm airflow and pressure requirements before connecting any pneumatic tool or lifting equipment.

Read more less

ApplicationFor loading suitable wheeled equipment onto a compatible trailer or loading platform within the ramp rating and permitted loading geometry.Item Specifics Quantity: 2 ramps Dimensions per ramp: 80 x 15 inches (length x width) Listed effective width: 15 inches Listed capacity per ramp: 3,000 lb Material: 6063-T5 aluminum alloy Finish: Mill finish Surface style: Open-grid construction Attachment style: Hook end Features Hook ends locate the ramps on a matching support edge. The open-grid surface provides wheel contact along the loading path. Package Included2 x 80 x 15 inch aluminum loading rampsImportant Notes The 3,000 lb figure is per ramp; it is not a blanket vehicle compatibility statement or an approval for every 6,000 lb vehicle. Confirm equipment weight distribution, wheelbase, ramp angle and trailer attachment requirements. Secure both ramps before loading. Use the capacity and setup limits shown on the supplied ramp labels and instructions.

Read more less

ApplicationFor removal and installation of compatible oxygen sensors, oil pressure sending units and other sensors with matching hex sizes and access clearance.Item Specifics Set quantity: 7 sensor sockets Drive sizes: 3/8 inch and 1/2 inch, depending on socket Sensor socket sizes: Includes listed 22 mm and 27 mm profiles; confirm pressure switch socket sizes before ordering Material and finish: CR-V steel; black oxide finish Case color: Red or blue; supplied at random Features Slotted oxygen sensor sockets allow access around connected sensor wiring. Deep, low-profile and offset socket forms provide options for different sensor locations. Package Included 1 x 1/2-inch-drive pressure/vacuum switch socket 1 x 3/8-inch-drive, 22 mm wide-slot sensor socket 1 x 1/2-inch-drive, 27 mm slotted thermal sensor socket 1 x 3/8-inch-drive, 22 mm narrow-slot sensor socket 1 x 3/8-inch-drive deep oil pressure sending unit socket 1 x 3/8-inch-drive, 22 mm low-profile oxygen sensor socket 1 x 1/2-inch-drive, 22 mm long-reach oxygen sensor socket 1 x Storage case Important Notes Match the actual sensor hex and socket profile before use; SAE and metric sizes are not automatically interchangeable. Case color does not change the listed contents. A thread chaser is not listed as an included component.

Read more less

ApplicationFor adjusting the balance of a supported engine during removal or installation with a compatible engine hoist.Item Specifics Type: Engine hoist load leveler Listed load capacity: 1,500 lb (3/4 US ton) Chain mounting positions: 3 Material: Steel Color: Red Features The leveling mechanism changes the suspended load angle for alignment during engine handling. Three chain mounting positions accommodate different approved lifting-point arrangements. Package Included1 x Engine hoist load levelerImportant Notes Engine hoist is not included. Use approved engine lifting points and follow the supplied instructions. Do not exceed the lowest capacity of the hoist, leveler, chains or attachment points.

Read more less

ApplicationFor supporting a compatible vehicle transmission during removal or installation when fitted to a suitable floor jack.Item Specifics Type: Transmission floor jack adapter Listed load capacity: 1,100 lb Saddle tilt: 30 degrees forward and backward Chain length: 25 inches Material: Steel Color: Black and silver Features The tilting saddle helps align the supported transmission with the installation angle. One retaining chain is supplied to help secure the transmission to the adapter. Package Included 1 x Transmission floor jack adapter 1 x Retaining chain Important Notes Floor jack is not included. Confirm saddle connection dimensions and transmission contact points before ordering. Do not exceed the lowest rated capacity of the jack, adapter or securing components. This adapter supports a transmission; it is not a vehicle lifting saddle.

Read more less