Welding Consumables

ER70S-6 Mild Steel MIG Welding Wire Highlights Premium ER70S-6 mild steel MIG welding wire delivers stable arc performance, low spatter, and smooth weld appearance for general steel welding applications. Key Features ✔ High-Quality Copper Coated Wire – Improves electrical conductivity, supports stable arc performance, and helps produce clean, consistent welds. ✔ Excellent Deoxidation Performance – ER70S-6 formulation with manganese and silicon provides reliable welding performance on mild steel, including surfaces with light rust or contamination. ✔ Shielding Gas Compatible – Designed for MIG welding with CO₂ or argon/CO₂ mixed shielding gases for strong and consistent weld results. ✔ Multiple Diameter Options – Available in 0.023", 0.030", 0.035", and 0.045" diameters to match different welding thicknesses and applications. ✔ Various Spool Sizes Available – Offered in multiple weight and pack options, from small project spools to larger welding supply sizes. Specifications Specification Details Welding Wire Type ER70S-6 Solid MIG Welding Wire Material Mild Steel Coating Copper Coated Welding Process GMAW / MIG Welding Shielding Gas CO₂ or Argon/CO₂ Mixed Gas Wire Diameter Options 0.023" / 0.030" / 0.035" / 0.045" Diameter Conversion 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm) Weight Options 2 lb / 4 lb / 10 lb / 20 lb / 33 lb / 44 lb Spool Size 8" Spool Typical Chemical Composition (wt%) Element Content C 0.08 Mn 1.89 Si 0.83 S 0.019 P 0.021 Cu 0.24 Fe Balance   Applications Package Includes 1 × ER70S-6 MIG Welding Wire Spool Selected weight and pack quantity according to the chosen option                                                                                                                                                                                      

Read more less

Product description Mig Solid Welding Wire Fit for Carbon and Carbon-Manganese steels   Low spatter, high feedability, no porosity, good bead appearance, easy to weld Shielding gas is required: 80% Ar + 20% CO2 or 100% CO2, all positions, single and multi pass welding Note   WARNING: This product can expose you to chemicals known to the State of California to cause birth defects or reproductive harm. For more information, go to: www.P65Warnings.ca.gov. ER70S-6 Mild steel MIG welding wire Specification: ASME SF A5.18 Diameters: 0.030 inch(0.8mm) Spool Packages: 2 spools     ER70S-6 is made from a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce quality welds.   Copper-plated and layer wound. Especially well suited for sheet metal applications or structural plate steels that have moderate amounts of rust oil or mill scale on them.   Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates.     From the brand       Findmall focuses on the field of industrial products and is committed to becoming the top professional industrial tools supplier. Made of high-quality material and refined through strict processing and testing, our products stand out with high precision and durable performance. Over the years, we have provided millions of customers with both high-quality household and industrial manufacturing tools. In Findmall, you can FIND MORE TOOLS you need.   Why choose FINDMALL? Findmall is as serious about industrial tools as you are. We specialize in producing the high precision household and industrial manufacturing tools so that each consumer can enjoy the convenience through technology. Our advantage We have the most comprehensive product portfolio and knowledgeable staff, and our professional production technology is ahead of other industry sellers. Our goals We can provide convenience to customers worldwide with high-quality household and industrial manufacturing tools.   Abrasive & Finishing Products The good products for your professional skills even better           Abrasive & Finishing Products     Tools & Home Improvement The high-quality tools will help you increase your productivity           Tools & Home Improvement     Industrial & Scientific The high precision tool ensure it's work integrity and eliminate rework           Industrial & Scientific     Lathe Parts & Accessories With durable performance, long-term usage           Lathe Parts & Accessories        

Read more less

  Product Description 2 Spool ER70S-6 Mild Steel MIG Welding Wire Spool 0.035 Inch Specifications: Standard: ER70S-6 Weight: 20 lbs Diameter: 0.035in Features: Stable arc Less sparks and splashes Adapt to a wide range of welding currents Note: Gas produced during operation can be harmful to your health, arc rays can damage eyes and burn skin, and proper eye, ear, and body protection must be worn when using Warning: This product can expose you to chemicals induding lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Read more less

Product description   ER70S-6 Mild Steel 0.030 Inch MIG Welding Wire Low Splatter 44 Pound Spool Fit for All Position Gas Welding Deposited chemical composition: (wt%): C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11 Package Includes: 44 pound spool ER70S-6 0.030 inch (0.8mm) MIG welding wire Specification: Mild Steel Wire Diameter: 0.030 inch (0.8mm) Center Hole Diameter: 2 inch Wide Spool: 4 inch Spool Diameter: 10.5 inch Weight: 44 lbs   Excellent Weldability: Low-carbon steel is one of the easiest to weld among all steel grades, allowing the use of various welding methods (such as arc welding, MIG, TIG, etc.) without significant hardening or cracking issues. Excellent all-position welding performance: No porosity, good appearance of the weld path, easy to weld Center Hole Diameter: 2 inch. Provide performance support in high-speed, automated welding       Note: Gas produced during operation can be harmful to your health, arc rays can damage eyes and burn skin, and proper eye, ear, and body protection must be worn when using Warning: This product can expose you to chemicals induding lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov.

Read more less

Highlights E71T-GS self-shielded flux core welding wire designed for gasless MIG welding, providing stable welding performance and smooth weld results for carbon steel applications. Key Features ✔ No Shielding Gas Required – Self-shielded flux core design eliminates the need for external shielding gas, ideal for convenient welding operations. ✔ Stable Arc Performance – Provides smooth arc action, good weld appearance, and reduced spatter for easier welding. ✔ Multiple Diameter Choices – Available in 0.030", 0.035", and 0.045" diameters to suit different welding tasks and material thicknesses. ✔ Flexible Spool Sizes – Available in multiple spool weights and pack options to meet both small repair jobs and larger welding projects. ✔ Wide Compatibility – Suitable for carbon steel welding, fabrication, maintenance, repair work, and DIY welding applications. Specifications Specification Details Welding Wire Type E71T-GS Self Shielded Flux Core Wire Welding Process Gasless MIG Welding Material Carbon Steel Wire Diameter Options 0.030" / 0.035" / 0.045" Diameter Conversion 0.030" (0.8mm), 0.035" (0.9-1.0mm), 0.045" (1.2mm) Weight Options 2 lb / 10 lb / 11 lb Package Options Single Spool / 2-Pack / 3-Pack / 4-Pack Shielding Gas Not Required Welding Position Flat, Horizontal, Vertical, Overhead Application Suitable for carbon steel welding, automotive repair, metal fabrication, workshop maintenance, outdoor repair, and general DIY welding projects. Package Includes 1 × E71T-GS Self Shielded Flux Core Welding Wire Spool Selected quantity according to the chosen package option

Read more less

ER5356 Aluminum MIG Welding Wire Highlights ER5356 aluminum MIG welding wire delivers smooth wire feeding, stable arc performance, and strong, corrosion-resistant welds for aluminum fabrication, repair, and production. Available in multiple wire diameters, spool weights, and pack quantities to meet both professional and industrial welding needs. Key Features ✔ Premium ER5356 Aluminum Alloy Manufactured to AWS A5.10 specifications, this ER5356 aluminum welding wire provides high tensile strength, excellent corrosion resistance, and reliable weld quality for a wide range of aluminum applications. ✔ Smooth & Consistent Wire Feeding Precision-wound wire feeds smoothly through MIG welding equipment, helping reduce interruptions while maintaining a stable arc and clean weld appearance. ✔ Excellent Welding Performance Produces strong, ductile welds with excellent crack resistance and low spatter when used with proper shielding gas, making it suitable for both fabrication and repair work. ✔ Multiple Size & Package Options Available in different wire diameters, spool weights, and pack quantities, allowing users to choose the configuration that best fits maintenance, workshop, or production requirements. ✔ Wide Range of Applications Compatible with welding many aluminum alloys including 5052, 5056, 5083, 5086, 5154, 5254, 5454, 5456, and 6061, making it ideal for marine, automotive, trailer, industrial, and structural fabrication. Specifications Item Specification Product Type Aluminum MIG Welding Wire AWS Classification ER5356 Welding Process GMAW (MIG) Material Aluminum Alloy Wire Diameter 0.035" (0.9 mm), 0.045" (1.2 mm) Spool Weight 1 lb, 5 lb, 16 lb Pack Quantity 1 Pack, 2 Pack, 4 Pack, 6 Pack Standard AWS A5.10 Applications Suitable for professional aluminum welding applications including: Marine fabrication and boat repair Automotive body and frame repair Trailer manufacturing Aluminum tanks and fuel tanks Industrial equipment maintenance Structural aluminum fabrication General aluminum manufacturing and repair Package Includes ER5356 Aluminum MIG Welding Wire (Selected Diameter, Spool Weight & Pack Quantity) Safety Information Wear approved welding helmet, gloves, and protective clothing during operation. Use only in well-ventilated areas or with appropriate fume extraction. Use 100% argon shielding gas for recommended welding performance. Follow all welding equipment manufacturer's operating instructions. California Proposition 65 Warning ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Read more less

Highlights Premium E71T-11 gasless flux-cored MIG welding wire delivers stable arc performance, low spatter, and excellent weld quality for carbon steel fabrication, maintenance, and outdoor welding applications. Key Features ✔ Gasless Self-Shielded Welding No external shielding gas required, making it ideal for outdoor jobs and windy environments. ✔ Stable Arc & Low Spatter Produces smooth arc starts, minimal spatter, and clean weld beads, reducing post-weld cleanup. ✔ All-Position Welding Meets AWS E71T-11 standards and supports flat, horizontal, vertical, and overhead welding. ✔ High Productivity Large 10 lb spool provides longer continuous welding time while reducing spool replacement frequency. ✔ Wide Range of Applications Suitable for carbon steel fabrication, equipment maintenance, construction, repair work, and steel structure projects. Specifications Item Specification Model E71T-11 Welding Process Gasless Flux-Cored MIG Material Carbon Steel Wire Diameter 0.030" (0.8 mm) Spool Weight 10 lb Quantity 1 Pc / 2 Pcs / 4 Pcs Welding Position Flat, Horizontal, Vertical, Overhead Standard AWS E71T-11 Application Designed for welding low-carbon steel in industrial maintenance, steel fabrication, construction, equipment repair, farm equipment, and general fabrication projects. Suitable for both indoor and outdoor welding without external shielding gas. Safety Information Wear appropriate eye, face, hand, and body protection during welding. Ensure adequate ventilation, as welding fumes and gases may be hazardous to health. Follow all recommended welding safety practices and equipment operating instructions. California Proposition 65 Warning ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Read more less

Highlights Premium ER4043 aluminum MIG welding wire delivers stable arc performance, smooth wire feeding, and clean welds for a wide range of aluminum fabrication, repair, and maintenance applications. Key Features ✔ Stable Arc Performance Produces a stable arc with low spatter and smooth weld beads, helping improve welding efficiency while reducing post-weld cleanup. ✔ Excellent Wire Feeding Manufactured with a uniform wire diameter and smooth surface for consistent feeding and reliable welding performance. ✔ Suitable for Common Aluminum Alloys Compatible with 3003, 5052, 6061, 6063, and other commonly used aluminum alloys for dependable weld quality. ✔ All-Position Welding Designed for flat, horizontal, vertical, and overhead welding, providing consistent results across various welding positions. ✔ Wide Range of Applications Ideal for automotive repair, bicycle frames, trailers, marine equipment, industrial fabrication, equipment maintenance, and general aluminum welding projects. Specifications Item Specification Model ER4043 Material Aluminum Welding Process MIG (GMAW) Wire Diameter 0.030" / 0.035" / 0.045" Spool Weight 1 lb / 16 lb Quantity 1 Pc / 2 Pcs / 4 Pcs / 6 Pcs Welding Position Flat, Horizontal, Vertical, Overhead Application ER4043 aluminum MIG welding wire is suitable for welding many common aluminum alloys, including 3003, 5052, 6061, and 6063. It is widely used for automotive repair, bicycle frames, trailers, marine equipment, industrial fabrication, equipment maintenance, and general aluminum welding projects. Designed to produce smooth, clean welds with reliable performance in both professional workshops and home garages. Safety Information Wear appropriate eye, face, hand, and body protection during welding. Ensure adequate ventilation, as welding fumes and gases may be hazardous to health. Follow all recommended welding safety practices and equipment operating instructions. California Proposition 65 Warning ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Read more less

Highlights ER4043 aluminum TIG welding rods are designed for reliable aluminum welding applications, offering smooth feeding, stable arc performance, and good resistance to hot cracking. Suitable for fabrication, repair, and maintenance projects involving aluminum components. Key Features ✔ ER4043 Aluminum Alloy – Made from aluminum alloy filler material commonly used for TIG welding of aluminum components and assemblies. ✔ Smooth TIG Welding Performance – Designed for stable arc control, easy feeding, and consistent weld results during manual TIG welding. ✔ Hot Crack Resistance – ER4043 alloy provides good resistance to hot cracking, helping create reliable weld joints on suitable aluminum alloys. ✔ Convenient 14 Inch Length – Pre-cut welding rods provide comfortable handling and precise filler material control during TIG welding operations. ✔ Wide Application Range – Suitable for aluminum fabrication, machinery repair, tanks, heat exchangers, piping, and general maintenance projects. Specifications Item Specification Product Type Aluminum TIG Welding Rods Model ER4043 Material Aluminum Alloy Diameter Options 3/32 Inch Length 14 Inch Weight Options 0.5 lbs / 1 lbs / 2 lbs Welding Process TIG Welding Application ER4043 aluminum TIG welding rods are suitable for welding and repairing aluminum components, including machinery parts, tanks, heat exchangers, piping systems, and aluminum structures. They are commonly used in industrial maintenance, fabrication, and repair applications where aluminum alloy welding is required.

Read more less

Highlights Premium ER70S-6 carbon steel TIG welding rods provide stable arc performance, low spatter, and reliable weld quality for all-position welding. Available in 80-piece and 100-piece packs for both professional and workshop use. Key Features ✔ ER70S-6 Carbon Steel FormulaProvides stable arc performance, smooth weld beads, and excellent conductivity for dependable welding results. ✔ Accurate DimensionsEach welding rod measures 1/16" (1.6 mm) in diameter and 13" (330 mm) in length for consistent feeding and operation. ✔ Smooth Welding PerformanceDesigned for easy arc starts, minimal spatter, and strong weld deposits to improve welding efficiency. ✔ Multiple Package OptionsChoose between 80-piece or 100-piece packs to suit different project sizes and replacement needs. ✔ Wide Range of ApplicationsSuitable for industrial maintenance, structural steel fabrication, farm equipment repair, shipbuilding, and general carbon steel welding. Specifications Item Specification Model ER70S-6 Material Carbon Steel Welding Process TIG Diameter 1/16" (1.6 mm) Length 13" (330 mm) Quantity 80 Pieces / 100 Pieces Applications Designed for welding carbon steel in fabrication shops, equipment maintenance, automotive repair, structural steelwork, farm machinery, and other general-purpose TIG welding applications. Package Includes 1 × ER70S-6 Carbon Steel TIG Welding Rods (80 Pieces or 100 Pieces, depending on the selected variant) Safety Information Always wear appropriate eye, face, hand, and body protection during welding. Use only in well-ventilated areas or with appropriate fume extraction. Follow all welding equipment manufacturer's instructions and accepted welding safety practices. Welding fumes and gases may be hazardous to your health. Avoid breathing fumes directly. Keep out of reach of children. California Proposition 65 Warning ⚠ WARNING: This product and welding operations may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Read more less

ER5356 Aluminum TIG Welding Rods Highlights ER5356 aluminum TIG welding rods are designed for reliable welding of 5000 series aluminum alloys. Featuring a 36" length, single-end stamped identification, and excellent arc stability, they are ideal for marine, automotive, fabrication, and repair applications. Key Features ✔ Premium ER5356 Aluminum Alloy Manufactured to ER5356 specifications, these filler rods provide excellent strength, corrosion resistance, and dependable weld quality for aluminum fabrication and repair. ✔ Smooth Arc Performance Delivers stable arc characteristics, low spatter, and consistent weld appearance when used with 100% argon shielding gas, making welding easier and more efficient. ✔ 36-Inch Single-End Stamped Rods Each rod measures 36" (914 mm) and features single-end stamping for quick and easy filler metal identification during use. ✔ Multiple Diameter & Package Options Available in multiple diameters and package weights to accommodate everything from precision repairs to heavy-duty fabrication projects. ✔ Wide Range of Applications Suitable for welding many aluminum alloys including 5052, 5083, 5086, 5154, 5254, 5454, 5456, and similar grades commonly used in marine, transportation, and structural fabrication. Specifications Item Specification Product Type Aluminum TIG Welding Rod AWS Classification ER5356 Welding Process GTAW (TIG) Material Aluminum Alloy Rod Length 36" (914 mm) Diameter Varies by selected option Package Weight Varies by selected option Identification Single End Stamped Shielding Gas 100% Argon Recommended Applications Designed for professional and general-purpose aluminum welding applications, including: Marine fabrication and boat repair Trailer and truck body manufacturing Automotive aluminum components Fuel tanks and storage tanks Architectural aluminum structures Industrial fabrication and maintenance Aluminum frames, railings, and equipment repair Package Includes 1 × ER5356 Aluminum TIG Welding Rods (Selected Diameter & Package Weight) Safety Information Wear approved eye, face, hand, and body protection during welding. Use only in well-ventilated areas or with appropriate fume extraction. Follow all recommended welding safety practices and equipment operating instructions. 100% argon shielding gas is recommended for optimal welding performance. California Proposition 65 Warning ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Read more less

Highlights Premium ER70S-2 mild steel TIG welding rods feature copper-coated surfaces for stable arc starts, excellent weld quality, and reliable performance on carbon steel. Available in multiple diameters and package sizes for fabrication, repair, and maintenance applications. Key Features ✔ ER70S-2 Mild Steel Filler RodDesigned for TIG welding of carbon steel with excellent arc stability, smooth weld beads, and dependable mechanical performance. ✔ Copper-Coated SurfaceProvides enhanced electrical conductivity for consistent arc starts, stable welding performance, and reduced oxidation during storage. ✔ Multiple Diameter OptionsAvailable in 1/16", 3/32", and 1/8" diameters to accommodate thin sheet metal, tubing, structural fabrication, and general-purpose welding. ✔ Suitable for All-Position WeldingPerforms well in flat, horizontal, vertical, and overhead welding, making it suitable for fabrication, maintenance, and repair work. ✔ Multiple Package SizesChoose from 2 lb, 5 lb, or 10 lb packages to meet hobby, workshop, or industrial production requirements. Specifications Item Specification Product Type TIG Welding Rod Classification ER70S-2 Material Mild Steel Surface Copper Coated Length 36 in (914 mm) Diameter Options 1/16", 3/32", 1/8" Package Weight Options 2 lb, 5 lb, 10 lb Welding Process TIG (GTAW) Welding Position All Position Application Suitable for welding carbon steel, mild steel, small-diameter tubing, sheet metal, structural fabrication, equipment repair, automotive maintenance, farm equipment, and general metalworking applications. Performs well on materials with light rust or mill scale when proper welding procedures are followed. Package Includes 1 × Box of ER70S-2 Mild Steel TIG Welding Rods (Package weight varies by selected option) Safety Information Wear approved eye, face, hand, and body protection during welding. Use only in well-ventilated areas to minimize exposure to welding fumes and gases. Follow all applicable welding safety procedures and equipment instructions. California Proposition 65 Warning ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Read more less

Highlights ER4043 aluminum TIG welding rods deliver stable arc performance, low spatter, and smooth weld beads for aluminum fabrication, repair, and maintenance. Available in multiple diameters, lengths, and package weights to meet a wide range of welding applications. Key Features ✔ Premium ER4043 Aluminum Filler Alloy Manufactured from high-quality ER4043 aluminum alloy for dependable welding performance on a variety of aluminum materials. ✔ Stable Arc & Low Spatter Provides a smooth, stable arc with low spatter, helping reduce cleanup while producing consistent, high-quality welds. ✔ Smooth Weld Appearance Designed to minimize porosity and produce clean, uniform weld beads for professional welding results. ✔ Suitable for All-Position Welding Ideal for flat, horizontal, vertical, and overhead welding, including butt joints, lap joints, and T-joints. ✔ Multiple Sizes Available Available in various diameters, rod lengths, and package weights to accommodate hobby, repair, fabrication, and industrial welding needs. Specifications Item Specification Product Type TIG Welding Rod Model ER4043 Material Aluminum Welding Process TIG (GTAW) Available Diameters 1/16", 3/32", 1/8" Available Lengths 16", 36" Available Package Weights 1 lb, 2 lb, 5 lb, 10 lb Welding Position All Position Application ER4043 TIG welding rods are suitable for welding aluminum plates, aluminum sheets, cast aluminum components, and aluminum extrusions. Widely used for aluminum fabrication, equipment maintenance, automotive repair, trailer manufacturing, marine applications, construction projects, and general industrial welding. Package Includes 1 × Selected Pack of ER4043 Aluminum TIG Welding Rods

Read more less

Highlight Premium ER308L stainless steel TIG filler rods provide smooth arc performance, excellent corrosion resistance, and clean, low-carbon welds for professional stainless steel fabrication and repair. Key Features ✔ Low Carbon ER308L Alloy Designed for welding 304 and 304L stainless steel while minimizing carbide precipitation for improved corrosion resistance. ✔ Stable TIG Welding Performance Produces a smooth, stable arc with excellent puddle control, low spatter, and clean weld appearance. ✔ Excellent Corrosion Resistance Creates durable welds that maintain the corrosion resistance required for stainless steel applications. ✔ Multiple Size Options Available in 1/16", 3/32", and 1/8" diameters with 16" or 36" rod lengths and 1lb, 5lb, or 10lb package options. ✔ Wide Range of Applications Suitable for stainless steel fabrication, food processing equipment, piping, tanks, automotive exhaust systems, maintenance, and repair work. Specifications Item Description Product Type TIG Filler Rod AWS Classification ER308L Material Stainless Steel Welding Process TIG (GTAW) Polarity DCEN or AC Diameters 1/16", 3/32", 1/8" Rod Length 16" / 36" Package Weight 1lb / 5lb / 10lb Application ER308L TIG filler rods are designed for welding 304 and 304L stainless steel and are widely used in food processing equipment, breweries, chemical processing systems, stainless steel piping, pressure vessels, fabrication shops, automotive exhaust systems, maintenance, and general repair applications. Package Includes 1 × ER308L Stainless Steel TIG Welding Rod (Selected Size & Weight)

Read more less

Highlights Premium ER70S-6 carbon steel TIG welding rods designed for smooth arc starts, stable performance, and strong weld deposits. Available in multiple diameters, lengths, and package sizes for professional welding applications. Key Features ✔ ER70S-6 Carbon Steel MaterialProvides reliable weld strength, good deoxidation performance, and consistent results for carbon steel welding projects. ✔ Smooth Arc PerformanceDesigned for easy arc starts, stable welding operation, and reduced spatter for cleaner weld appearance. ✔ Multiple Size OptionsAvailable in 1/16", 3/32", and 1/8" diameters with 16" and 36" lengths to match different welding requirements. ✔ Professional Welding ApplicationsSuitable for industrial maintenance, structural steel work, farm equipment repair, shipbuilding, and general fabrication. ✔ Convenient Package SelectionOffered in 2 lb, 5 lb, and 10 lb packages to meet both workshop and professional welding needs. Specifications Specification Details Product Type TIG Welding Rod Material Carbon Steel Welding Rod Type ER70S-6 Diameter Options 1/16", 3/32", 1/8" Length Options 16", 36" Package Weight 2 lb, 5 lb, 10 lb Welding Process TIG (GTAW) Application Carbon Steel Welding Application Designed for TIG welding of carbon steel components, including industrial equipment maintenance, structural fabrication, farm equipment repair, shipbuilding projects, and general metalworking applications. Suitable for various welding positions when proper welding procedures and protective equipment are used. Package Includes 1 × ER70S-6 Carbon Steel TIG Welding Rod Pack (Selected Diameter, Length, and Weight Option)

Read more less

E7018 / E6013 / E6011 1/8" Welding Rods Highlight Premium 1/8" Arc Welding Rods (E7018, E6013, E6011) – High-Quality Carbon Steel Electrodes for All Welding Needs, 10 lb Box. Core Advantages ✔ Smooth & Steady ArcWorks with both AC and DC welders, even at low open-circuit voltage.✔ Minimal Operator Skill RequiredEasy to use, perfect for beginners or general-purpose welding.✔ Versatile Welding PositionsSuitable for flat, horizontal, vertical, and overhead welding.✔ Universal 1/8-inch sizeSuitable for standard arc welders; sold in 10-pound packs to meet the bulk needs of both professionals and DIY enthusiasts✔ Made of carbon steelDurable, high-quality electrodes that ensure reliable weldsSuitable for a wide range of carbon steel welding applications Specifications Item Details AWS Classification E7018 / E6013 / E6011 Diameter 1/8" (3.2 mm) Material Carbon Steel Welding Type AC or DC Welding Positions All-position (flat, horizontal, vertical, overhead)   Differences Between E7018, E6013, and E6011 Model Minimum Strength Welding Position Features Suitable Applications E7018 70 ksi All positions Low hydrogen, crack-resistant Thick steel, high-strength structural work E6013 60 ksi All positions Easy to use, smooth welds Thin steel, home DIY, light industrial E6011 60 ksi All positions High penetration, can weld rusty or dirty surfaces Repair, piping, outdoor work   Applications Package Includes 1 × 10 lbs box of 1/8" E7018 / E6013 / E6011 Arc Welding Rods FAQ Q1: What are the differences between E7018, E6013, and E6011?E7018: High strength, low hydrogen, and crack-resistant; best suited for welding thick steel plates.E6013: Produces smooth welds and is easy for beginners to use; suitable for welding thin steel plates.E6011: Offers strong penetration and can weld rusty or contaminated surfaces; an ideal choice for repair welding. Q2: Are these electrodes suitable for all welding positions?Yes, all three electrodes are suitable for flat, horizontal, vertical, and overhead welding. Q3: What materials can these electrodes weld?They are designed specifically for carbon steel and low-carbon steel applications. Q4: Are these electrodes suitable for beginners?Yes, E6013 and E6011 are suitable for beginners, while E7018 is better suited for professionals requiring high-strength welds.

Read more less

Highlights E7018 welding rods are carbon steel stick electrodes designed for strong, stable welds with excellent arc performance. Available in multiple diameters, lengths, and package sizes for fabrication, repair, construction, and general welding applications. Key Features ✔ E7018 Carbon Steel Electrode - Premium carbon steel welding rods provide reliable weld strength and smooth arc performance for general-purpose welding. ✔ AC/DC Welding Compatibility - Designed for use with both alternating current and direct current welding machines, offering flexible welding options. ✔ Stable Arc & Low Spatter - Produces a stable arc with smooth bead appearance and reduced spatter during welding. ✔ Multiple Sizes Available - Available in common welding rod sizes including 3/32", 1/8", 5/32", and 3/16" diameters with different lengths and weights. ✔ Wide Application Range - Suitable for fabrication, construction, machine parts, metal repair, structural welding, and general maintenance work. Specifications Item Specification Welding Rod Type E7018 Stick Welding Electrode Material Carbon Steel Welding Process SMAW / Stick Welding Current Type AC / DC Diameter Options 3/32", 1/8", 5/32", 3/16" Length Options 12", 14" Package Weight Options 5 lbs, 10 lbs, 50 lbs, 60 lbs Coating Type Low Hydrogen Electrode

Read more less

Highlights E6011 welding rods are carbon steel stick electrodes designed for deep penetration and reliable arc performance. With all-position welding capability and AC/DC compatibility, these electrodes are suitable for fabrication, repair, construction, and general maintenance applications. Key Features ✔ E6011 Carbon Steel Welding Electrode - Made from carbon steel with a cellulose potassium coating, providing strong penetration and reliable welding performance. ✔ All-Position Welding Capability - Designed for flat, horizontal, vertical, and overhead welding positions, making it suitable for various welding tasks. ✔ AC/DC Compatible Performance - Works with AC and DC reverse polarity (DCEP) welding equipment for flexible operation. ✔ Deep Penetration & Stable Arc - Provides excellent arc control, quick-freezing characteristics, and stable weld beads with reduced cleanup. ✔ Wide Application Range - Suitable for carbon steel structures, metal fabrication, machinery repair, automotive maintenance, construction, and general welding projects. Specifications Item Specification Welding Rod Type E6011 Stick Welding Electrode Material Carbon Steel Welding Process SMAW / Stick Welding Coating Type Cellulose Potassium Coating Current Type AC / DC Reverse Polarity (DCEP) Diameter Options 3/32", 1/8", 5/32" Length 14" Package Weight Options 2 lbs, 5 lbs, 10 lbs, 60 lbs Application E6011 welding electrodes are suitable for: Carbon steel structures Metal fabrication Construction welding Machinery repair Automotive repair Equipment maintenance Structural assembly General-purpose welding projects

Read more less

Highlights E6013 welding rods are carbon steel stick electrodes designed for smooth arc performance and clean weld appearance. Suitable for general fabrication, repair, construction, and low-carbon steel welding applications. Key Features ✔ E6013 Carbon Steel Welding Electrodes - Designed for welding low-carbon steel with stable arc performance and reliable weld quality. ✔ AC/DC Welding Compatibility - Works with both AC and DC welding machines, including small AC welders and standard welding equipment. ✔ Smooth Arc & Low Spatter - Provides stable arc control, easy operation, and cleaner weld beads with reduced spatter. ✔ All-Position Welding Capability - Suitable for flat, horizontal, vertical, and overhead welding applications. ✔ Wide Application Range - Ideal for metal fabrication, construction, machinery parts, structural assemblies, ship repair, and general maintenance. Specifications Item Specification Welding Rod Type E6013 Stick Welding Electrode Material Carbon Steel Welding Process SMAW / Arc Welding Current Type AC / DC Diameter Options 3/32", 1/8", 5/32" Length Options 11.8", 14" Package Weight Options 1 lbs, 2 lbs, 5 lbs, 10 lbs   Application E6013 welding electrodes are suitable for: Low-carbon steel welding Sheet metal fabrication Metal repair Ductwork welding Light structural welding Machinery maintenance General fabrication projects

Read more less

Highlights E7014 welding rods are carbon steel stick electrodes with a titanium calcium flux coating, providing smooth arc performance, easy slag removal, and reliable weld quality. Suitable for fabrication, repair, and structural welding applications. Key Features ✔ E7014 Carbon Steel Welding Electrode - Features titanium calcium flux coating for stable welding performance and smooth weld appearance. ✔ AC/DC Welding Compatibility - Designed for use with both AC and DC welding equipment, providing flexible operation for different welding environments. ✔ Stable Arc & Easy Slag Removal - Delivers smooth arc characteristics, good bead appearance, and simplified post-weld cleanup. ✔ Multiple Welding Positions - Suitable for flat, horizontal, vertical, and overhead welding applications. ✔ Wide Application Range - Ideal for structural welding, fabrication, steel construction, machinery repair, and general maintenance projects. Specifications Item Specification Welding Rod Type E7014 Stick Welding Electrode Material Carbon Steel Welding Process SMAW / Arc Welding Coating Type Titanium Calcium Flux Coating Current Type AC / DC Diameter Options 3/32", 1/8", 5/32" Length 14 Inch Package Weight 5 lbs   Application E7014 welding electrodes are suitable for: Structural steel welding Low and medium carbon steel welding Metal fabrication Machinery repair Steel structures Construction projects General maintenance welding

Read more less

Highlights E308L-16 stainless steel stick electrodes provide reliable welding performance for stainless steel fabrication, repair, and maintenance applications. Designed with stable arc characteristics and smooth operation for professional and general welding tasks. Key Features ✔ Stainless Steel Welding Electrode – E308L-16 stick electrodes are designed for stainless steel welding applications, providing dependable weld performance for fabrication and repair projects. ✔ Smooth Arc Performance – Designed for easy arc starts, stable welding operation, and clean slag removal to improve welding efficiency. ✔ Multiple Welding Positions – Suitable for flat, horizontal, vertical, and overhead welding positions, offering flexibility for different welding tasks. ✔ Strong Weld Deposits – Produces consistent weld deposits for stainless steel components, equipment repair, and maintenance work. ✔ Wide Application Uses – Ideal for industrial maintenance, shipbuilding, farm equipment repair, stainless steel fabrication, and general metalworking projects. Specifications Item Specification Product Type Stainless Steel Stick Electrodes Model E308L-16 Material Stainless Steel Available Sizes 3/32" x 12", 3/32" x 14", 1/8" x 14" Available Weight 2 lbs / 5 lbs Welding Process SMAW (Stick Welding) Application E308L-16 stainless steel welding rods are suitable for stainless steel fabrication, industrial equipment maintenance, shipbuilding projects, agricultural equipment repair, and various metalworking applications. The electrodes can be used for welding tasks requiring stainless steel compatibility and reliable weld performance.

Read more less

Highlights E309L-16 stainless steel stick electrodes are designed for welding stainless steel and joining dissimilar metals. They provide stable arc performance, smooth slag removal, and reliable weld quality for fabrication, maintenance, and repair applications. Key Features ✔ Designed for Dissimilar Metal Welding – Ideal for joining stainless steel to carbon steel and other compatible dissimilar metals in fabrication and repair applications. ✔ Stable Arc Performance – Provides smooth arc starts, consistent welding performance, and easy slag removal for improved efficiency. ✔ Multiple Welding Positions – Suitable for flat, horizontal, vertical, and overhead welding positions for a wide range of projects. ✔ Reliable Weld Deposits – Produces strong, consistent welds for maintenance, fabrication, and equipment repair. ✔ Wide Range of Applications – Suitable for industrial maintenance, equipment fabrication, repair work, and stainless steel welding projects. Specifications Item Specification Product Type Stainless Steel Stick Electrodes Model E309L-16 Material Stainless Steel Available Sizes 3/32" x 12", 1/8" x 14" Available Weight 5 lbs Welding Process SMAW (Stick Welding) Application E309L-16 stainless steel welding rods are suitable for joining stainless steel to carbon steel and other compatible dissimilar metals. They are commonly used for industrial maintenance, equipment fabrication, repair work, and applications requiring reliable weld performance on mixed-metal assemblies.

Read more less