Fitment:
Replacement for Cayenne 3.0L TDI V6 DIESEL A/T Diesel Platinum Edition Sport Utility 2014
Replacement for Cayenne 3.0L TDI V6 DIESEL A/T Diesel Sport Utility 2013-2014
Replacement for Cayenne 3.0L V6 ELECTRIC/GAS A/T S Hybrid Sport Utility 2011-2014
Replacement for Cayenne 3.6L V6 A/T Base Sport Utility 2011-2014
Replacement for Cayenne 3.6L V6 A/T Platinum Edition Sport Utility 2014
Replacement for Cayenne 3.6L V6 M/T Base Sport Utility 2011-2014
Replacement for Cayenne 3.6L V6 M/T Platinum Edition Sport Utility 2014
Replacement for Cayenne 4.8L V8 A/T GTS Sport Utility 2013-2014
Replacement for Cayenne 4.8L V8 A/T S Sport Utility 2011-2014
Replacement for Cayenne 4.8L V8 A/T Turbo S Sport Utility 2013-2014
Package Includes: Set of 2 Electric Power Tailgate（Left + Right Side )
How to Properly Install a standard lift support？
1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.
2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.
3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.
5. Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. If you have any issues during the installation PLEASE contact us. Never force a support.
