Products

Electric Locker Wire harness Axle P5155359Replacement for: Jeep Wrangler JK JKU RUBICON Dana 44Part Number: P5155359Features:Easy to operate - plug this harness into your axle connector, then supply a fused switched 12 volt source and you have your electric lockers workingThis harness plugs into the connector  (not included) on your  axle, just about 18 of  black and red 18 gauge  heavy duty automotive wire, Then shielded by the same length of polyethylene corrugated loomThe wire is rated for -40C to 125C temps, and is the same wire as what the factory usesPackage Include:1 x one harness with locker plug

Read more less

Product description   ER70S-6 Mild Steel 0.030 Inch MIG Welding Wire Low Splatter 44 Pound Spool Fit for All Position Gas Welding Deposited chemical composition: (wt%): C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11 Package Includes: 44 pound spool ER70S-6 0.030 inch (0.8mm) MIG welding wire Specification: Mild Steel Wire Diameter: 0.030 inch (0.8mm) Center Hole Diameter: 2 inch Wide Spool: 4 inch Spool Diameter: 10.5 inch Weight: 44 lbs   Excellent Weldability: Low-carbon steel is one of the easiest to weld among all steel grades, allowing the use of various welding methods (such as arc welding, MIG, TIG, etc.) without significant hardening or cracking issues. Excellent all-position welding performance: No porosity, good appearance of the weld path, easy to weld Center Hole Diameter: 2 inch. Provide performance support in high-speed, automated welding       Note: Gas produced during operation can be harmful to your health, arc rays can damage eyes and burn skin, and proper eye, ear, and body protection must be worn when using Warning: This product can expose you to chemicals induding lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov.

Read more less

2 Inch Boring Head Tool Set, 1/2 Inch Straight Shank and 9Pcs 1/2 Inch C6 Boring Bar Set Milling Machines, Horizontal Milling Machines and Boring Machines Specification: Mount Type: Threaded Body Diameter: 2" Boring bar Hole: 1/2" Cross Hole Dia: 1/2" Maximum Offset: 5/8" Thread: 1-1/2-18 Dial Reading: 0-50 Radius Direct Reading: 0.001 Features: The main body of the boring head usually adopts a universal threaded interface. If necessary, you can also replace it with other types of handles according to your existing equipment. Packaging Includes: 1Pcs 2" Boring Head 1Pcs 1/2" Straight Shank 9Pcs 1/2" C6 Boring Bar Set

Read more less

3Pcs Collet Chuck Set CAT40-TG100 3 Inch Collet Chuck Tooling Fit for CNC Engraving Machine and Milling Lathe Tool Specification: Accuracy: 0.0001" Color: Silver + Black. Collet Chuck with Projection Length: 3" Features: 1. Set: Includes 3 CAT40-TG100 collet chucks to meet replacement needs across multiple applications. 2. Replacement: Direct replacement for older or worn-out chucks; easy to install and ready for immediate use. 3. Quality: Exquisite craftsmanship and stable construction, enhancing machining efficiency and tool life. Package Includes: 3Pcs CAT40-TG100 Collet Chucks

Read more less

4Pcs BT40 ER32 2.75 Inch Accuracy Collet Chucks With 10pcs Collets for Drilling Machines, Grinding Machines and Lathes Specification: Length: 2.75 inches Chuck taper T.I.R. <0.0002 inches Features: 1. Stable operation, with transient balance adjusted. 2. Solid material, durable and sturdy, hardened by quenching, extends service life. Package Includes: 4pcs collet chucks and 10pcs collets

Read more less

5Pcs BT40 ER16 Collet Chuck Extension Length of 2.75 Inches for Fine Detail Cutting and Other CNC Machining Operations Specification: Conical angle: BT40 Collet series: ER16 Gauge length: 2.75 inches Features: 1.It has the ability to cool the spindle from the pull screw to the chuck. 2.The complete body accuracy machining and fine grinding of the inner hole enhance the stability and clamping force of the tool holder. Package Includes: 5Pcs BT40 ER16 collet chucks

Read more less

Adjustable D1-4 Mount 5C Collet Chuck, with Chuck Wrench, High Accuracy, for Metal Lathe Package Includes: 1 Piece of 5C Collet Chuck Features: 1.This chuck features a fully adjustable mounting system that lets you set concentricity, enabling low runout figures that rival toolholding solutions. 2.This chuck delivers accuracy and rigidity making accurate results more accessible. 3.Every unit includes a dedicated chuck wrench, so you can begin mounting and securing workpieces immediately after installation, no extra tooling purchases are needed for basic setup.

Read more less

CAT40 End Mill Holder, 1/8 Inch Diameter, G2.5/25000RPM Balance, for Milling, Drilling Specification: Diameter: 1/8 Inch Thread: 5/8 Inch-11 Gage Length: 2.75 Inch Application: Suited for end milling, drilling, and other critical rotating tool applications. Package Includes: 1 Piece of End Mill Holder Features: 1.Designed for exceptional runout accuracy, this holder achieves a maximum TIR of 0.0002 inch, ensuring high concentricity in accuracy operations. 2.Balanced to G2.5 at 25,000 RPM, it delivers stable performance at high speeds by minimizing vibration and improving surface finish. 3.The full contact shrink fit technology provides uniform clamping force across the entire bore length, no need for collets, wrenches, or set screws. 4.It features through-coolant capability and a 5/8 inch-11 mounting thread, with a compact 1/8 inch bore diameter and a maximum outer diameter of 0.875 inch on the holding section. 5.Suitable for end milling, drilling, and other critical rotating tool applications, this holder enables a streamlined setup with no additional accessories required.

Read more less

CAT50 Ball Bearing Keyless Drill Chuck, 1/2 Inch 202-1263A, for Drilling Machine, 6000RPM Specification: Shank: CAT50 Projection Length: 3.94 Inch Max RPM: 6000 Max Capacity: 1/2 Inch Min Capacity: 1/32 Inch Application: Designed specifically for rigorous CNC applications. Package Includes: 1 Piece of Drill Chuck Features: 1.This accuracy keyless chuck features a high accuracy ball bearing structure that delivers exceptional torque transmission, significantly reducing drill bit slippage and reduce lock ups during operation. 2.The jaws are hardened to 60 HRc with an advanced surface treatment that minimizes wear, ensuring long term accuracy and a secure grip even in high cycle production environments. 3.Engineered for smooth and reliable performance, this chuck minimizes vibration to enhance finish quality during demanding drilling tasks. 4.With its robust clamping force, it provides a powerful hold on cutting tools, transferring maximum spindle power for efficient machining of tough materials. 5.Designed specifically for rigorous CNC applications, this CAT50 integrated chuck offers consistent clamping force and rigidity, making it suitable for high torque operations where reliability and performance are critical.

Read more less

6Pcs C-Type 0-6" Outside Diameter Micrometer Accuracy 0.0001" 0-6" Outside Diameter Micrometer Micrometer Ranges: 0-1", 1-2", 2-3", 3-4", 4-5" And 5-6" Feature: Clear easy-to-read graduation, accurate to 0.0001" Material: Hardened and ground spindle with carbide anvil ensure durability and accuracy Details: Powder coated baked finish, fitted wood padded case, adjustment wrench and calibration standards Design: Ratchet handle and solid casting frame for precise application of force, lock nut Zero Setting Before using, clean measuring faces of the anvil and the spindle with soft cloth or soft paper. Then bring them together carefully by turning the ratchet stop. If the line marked "0" on the thimble does not coincide with the reference line on the sleeve. Adjust zero position in the following manners: Deviation within +0.01mm Lock the spindle by the locking device then adjust the sleeve with a spanner until the reference line comes exactly in line with "O" line on the thimble. Deviation over 0.01mm Lock the spindle with a locking device and release the ratchet stop with a wrench. Press the thimble onto the ratchet stop so that the "O" line coincides with the guide line on the sleeve. Tighten ratchet stop for final adjustment. Use the previous method if necessary. Reading Min reading is 0.01mm. Reading is 5.88mm. (see fig.) (Can estimate 0.001mm-0.002mm) Precautions Keep the instrument clean and dry. Do not disassemble and drop the instrument. Use ratchet stop to keep precision measuring.

Read more less

Highlights Heavy-duty rigid caster wheels featuring polyurethane tread wheels on iron cores, durable construction, and top plate mounting. Designed for stable load support, smooth rolling, and reliable performance in commercial and industrial applications. Key Features ✔ Heavy-Duty Capacity – Each caster supports up to 1000 lbs, providing reliable load capacity for heavy equipment, carts, workbenches, and material handling applications. ✔ Durable Wheel Construction – Polyurethane tread bonded onto iron cores delivers wear resistance, quiet operation, non-marking performance, and protection for different floor surfaces. ✔ Stable Rigid Design – Fixed caster construction provides straight-line movement and improved stability for heavy loads and equipment transportation. ✔ Smooth Rolling Performance – Roller bearing design reduces friction resistance, improves durability, and allows easier movement under heavy loads. ✔ Wide Applications – Suitable for hospitality carts, bakery equipment, hospital equipment, laboratory equipment, utility carts, dollies, workbenches, and industrial machinery. Specifications Item Specification Wheel Diameter 5" Wheel Material Polyurethane on Iron Core Mounting Type Top Plate Mount Caster Type Rigid Brake Type No Brake Bearing Type Roller Bearing Load Capacity 1000 lbs per Caster Quantity 1 Piece Application Ideal for hospitality carts, bakery and food service equipment, hospital equipment, laboratory equipment, material handling equipment, utility carts, maintenance carts, workbenches, and industrial machinery. Package Includes 1 × Rigid Caster Wheel

Read more less

Highlights Designed for demanding industrial applications, this 6-inch heavy-duty swivel caster features a polyurethane wheel bonded to a cast iron core, a durable galvanized steel bracket, and a plate mount design. It provides smooth rolling, reliable load support, and long-lasting performance for toolboxes, workbenches, carts, and industrial equipment. Key Features ✔ Heavy-Duty Load Capacity – Supports up to 1,200 lbs per caster, making it ideal for transporting heavy equipment and industrial materials. ✔ Polyurethane Wheel with Cast Iron Core – Durable polyurethane tread bonded to a cast iron core offers excellent wear resistance, impact absorption, and smooth rolling performance. ✔ Smooth Rolling with Roller Bearing – Roller bearing construction reduces rolling resistance and provides quiet, stable movement under heavy loads. ✔ Reliable Brake System – Equipped with a brake to help keep equipment securely in place when stationary. ✔ Corrosion-Resistant Construction – Galvanized steel bracket and built-in grease fitting support long service life and convenient maintenance. Specifications Item Specification Wheel Diameter 6 Inch Wheel Width 2 Inch Wheel Material Polyurethane (PU) Wheel Core Material Cast Iron Mounting Type Plate Mount Caster Type Swivel Brake Type Brake Bearing Type Roller Bearing Load Capacity 1,200 lbs per Caster Quantity 1 Pack Application Ideal for heavy-duty industrial and commercial applications, including: Toolboxes Workbenches Utility Carts Warehouse Equipment Manufacturing Equipment Mechanical Equipment Hand Trucks Garbage Bins Material Handling Equipment Industrial Transport Carts Package Includes 1 × 6 Inch Swivel Caster Wheel with Brake

Read more less

Highlights Heavy-duty caster wheel featuring polyurethane tread on iron core construction, swivel design, and wheel brake system. Designed for smooth mobility, reliable positioning, and high load capacity in industrial and commercial applications. Key Features ✔ Heavy-Duty Capacity – Supports up to 1500 lbs per caster, providing strong load support for heavy equipment, tool boxes, workbenches, and industrial applications. ✔ Durable Wheel Construction – Polyurethane tread bonded to iron core wheels offers excellent wear resistance, floor protection, quiet operation, and long service life. ✔ Smooth 360° Swivel Movement – Swivel caster design with roller bearings reduces rolling resistance and allows flexible direction changes for easier movement under heavy loads. ✔ Wheel Brake System – Equipped with a wheel brake that helps secure wheel rotation when engaged, improving stability during stationary use. ✔ Wide Applications – Suitable for tool boxes, workbenches, carts, machinery, cabinets, warehouse equipment, and other industrial or commercial applications. Specifications Item Specification Wheel Diameter 8" Wheel Material Polyurethane on Iron Core Mounting Type Top Plate Mount Caster Type Swivel Brake Type Wheel Brake Bearing Type Roller Bearing Load Capacity 1500 lbs per Caster Quantity 1 Piece Application Ideal for tool boxes, workbenches, carts, machinery, cabinets, warehouse equipment, workshops, factories, and other industrial or commercial applications requiring smooth movement and reliable load support. Package Includes 1 × Swivel Caster Wheel with Wheel Brake

Read more less

Highlights Heavy-duty caster wheel featuring polyurethane tread on iron core construction and a swivel design. Designed for smooth movement, high load capacity, and reliable performance in industrial and commercial applications. Key Features ✔ Heavy-Duty Capacity – Supports up to 1500 lbs per caster, providing strong load support for heavy equipment, tool boxes, workbenches, and industrial applications. ✔ Durable Wheel Construction – Polyurethane tread bonded to iron core wheels provides excellent wear resistance, floor protection, quiet operation, and long service life. ✔ Smooth 360° Swivel Movement – Swivel caster design with roller bearings reduces rolling resistance and allows flexible direction changes for easier maneuvering under heavy loads. ✔ Smooth Rolling Performance – Roller bearing construction helps reduce friction and provides stable, quiet movement across various surfaces. ✔ Wide Applications – Suitable for tool boxes, workbenches, carts, machinery, cabinets, warehouse equipment, and other industrial or commercial applications. Specifications Item Specification Wheel Diameter 8" Wheel Material Polyurethane on Iron Core Mounting Type Top Plate Mount Caster Type Swivel Bearing Type Roller Bearing Load Capacity 1500 lbs per Caster Quantity 1 Piece Application Ideal for tool boxes, workbenches, carts, machinery, cabinets, warehouses, workshops, factories, and other industrial or commercial applications requiring smooth movement and reliable load support. Package Includes 1 × Swivel Caster Wheel

Read more less

Highlights Front swivel caster wheel kit designed to upgrade rolling tool boxes with smoother mobility and improved steering control. Built with a durable steel frame for reliable performance in jobsites, garages, workshops, and warehouses. Key Features ✔ 360° Swivel Mobility – Front caster design allows smooth directional changes and improved maneuverability around corners and tight workspaces. ✔ Durable Steel Construction – Made with a sturdy steel frame to withstand frequent use and demanding working environments. ✔ Improved Toolbox Control – Helps enhance steering stability and makes transporting heavy tools and equipment easier. ✔ Quick Installation Design – Designed for easy installation without drilling by aligning with the designated mounting points on compatible tool boxes. ✔ Wide Applications – Suitable for jobsite tool storage, garages, workshops, warehouses, and mobile tool transportation. Specifications Item Specification Wheel Material Rubber Frame Material Steel Mounting Type Tool Box Mount Caster Type Swivel Brake Type No Brake Bearing Type Not Specified Compatibility Milwaukee Packout Rolling Tool Box Quantity 1 Piece Application Ideal for Milwaukee Packout rolling tool boxes, jobsite storage systems, garage tool storage, workshop equipment, warehouse transportation, and other mobile tool solutions. Package Includes 1 × Front Swivel Caster Wheel Kit

Read more less